DynaCaster
sE Electronics Uit productie

DynaCaster

Front-addressed cardioid dynamic microphone with a built-in pop filter, shockmount and stand mount, plus a switchable +30 dB active preamp. Aimed at podcasters, streamers, broadcasters and vocal or instrument recording.

  • Front-addressed cardioid dynamic with aluminum voice coil
  • Switchable preamp adds 30 dB gain (needs 48 V phantom)
  • Two recessed EQ switches give six configurations
  • Built-in 3-layer pop filter and shockmount
  • All-metal body with gold-plated 3-pin XLR
  • Frequency range 20 Hz - 19 kHz
Verkoop er zelf een

Foto’s

7

Advertenties

Nog geen advertenties van dit model

Als iemand een DynaCaster verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.

Verkoop er zelf een

Beschrijving

The DynaCaster DCM8 is an all-metal dynamic microphone with an aluminum voice coil and neodymium magnet, using capsule technology derived from the maker's V Series dynamics. It has a cardioid pattern and is addressed from the front, which helps reject room noise around a close source.

A switchable preamp adds 30 dB of gain when engaged and 48 V phantom power is supplied. With the switch off, the microphone works passively and needs no external power. Two recessed switches give up to six EQ configurations, covering low-end and high-end shaping, such as trimming boominess or sibilance, and the recessed placement protects settings from accidental changes.

A three-layer pop filter and a shockmount are built into the body, so no external accessories are needed. The integrated stand mount swivels widely and fits a range of boom arms. Connection is by a gold-plated 3-pin male XLR. The package includes an external windscreen, a thread adapter, a sticker and a manual with warranty card.

Video

Specificaties

Merk
sE Electronics
Model
DynaCaster
Categorie
Studio › Microfoons

Audio

Capsule
Dynamic
Voice coil
Aluminum
Magnet
Neodymium
Directional pattern
Cardioid
Frequency range
20 Hz - 19 kHz
Sensitivity
2.0 / 60 mV/Pa (-54 / -24 dBV)
Preamp gain (switchable)
+30 dB
EQ configurations
Up to 6 (two recessed switches)

Power

Powering
48V Phantom Power (P48 according to IEC 61938)
Current
3.0 mA
Electrical impedance
300 / 135 Ohms
Recommended load impedance
> 1k Ohms

Connectivity

Connector
3-pin male XLR (gold-plated)

Physical

Diameter x length
Ø 62 x 220 mm (ø 2.44 x 8.66 in.)
Weight
850 g (29.98 oz.)
Housing
All-metal, matte black finish
Pop filter
Integrated 3-layer
Shockmount
Integrated

In the box

Microphone
DynaCaster
Windscreen
External windscreen
Adapter
Thread adapter
Extras
sE logo sticker
Documentation
User manual with warranty card

Gegevens: seelectronics.com; foto’s: sE Electronics product page · bijgewerkt 2026-10-11 · Een fout gevonden? Schrijf ons