Pick it MC3
Moving-coil phono cartridge with an aluminium body and a Hyper-Spherical stylus, tuned for pop, rock and large-scale orchestral music. Aimed at turntable owners who want an all-round MC upgrade that fits standard half-inch mounting.
- Moving-coil cartridge, 0.4 mV output
- Full aluminium body, steel blue anodised
- Hyper-Spherical stylus, 5x250 µm tip
- Cryogenically treated cantilever
- Tracking force 2.0 g (1.8–2.2 g)
- 1/2 inch top mounting; screws and hex key included
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een Pick it MC3 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Pick it MC3 is a moving-coil cartridge from Pro-Ject's MC range, designed to match the company's tonearms. It is described as an all-purpose model with a dynamic character suited to pop and rock as well as big orchestral recordings. The generator uses an ARMCO pure iron cross coil with 6N linear crystal copper winding and delivers 0.4 mV output.
The stylus is a Hyper-Spherical type with a 5x250 µm tip radius, carried on a cryogenically treated cantilever, a process said to realign the crystal structure for smoother signal transmission. The body is anodised aluminium in steel blue. Threaded holes in the half-inch mounting pattern allow simple top mounting. Parts are sourced from Japan, and assembly and quality control take place in Europe.
A transparent stylus protector slides on from below. Mounting screws and a hex key are supplied. The recommended tracking force is 2.0 g, within a 1.8–2.2 g range, with a 30-hour break-in period. Because it is a low-output MC design, it needs a phono stage with MC input, loaded at 100–220 Ω.
Specificaties
- Merk
- Pro-Ject
- Model
- Pick it MC3
- Categorie
- DJ-apparatuur › Elementen en naalden
Audio
- Cartridge principle
- MC (Moving-Coil)
- Output voltage at 1 kHz
- 0,4 mV (3,54 cm/sec)
- Channel separation at 1 kHz
- 30 dB
- Frequency response
- 20 - 20 000 Hz +/- 1dB
- Tracking ability at 315Hz
- 70 μm
- Dynamic compliance
- 12µm/mN
- Recommended load resistance
- 100-220 Ω
Stylus and tracking
- Stylus type
- Hyper-Spherical
- Stylus tip radius
- 5x250 μm
- Tracking force, range
- 1,8 - 2,2 g (mN)
- Tracking force, recommended
- 2,0 g (mN)
- Tracking angle
- 20°
- Break-in period
- 30 hours
Physical
- Body
- Full aluminium, steel blue anodised
- Coil
- ARMCO pure iron cross coil, 6N linear crystal copper winding
- Cantilever
- Cryogenically treated
- Mounting standard
- 1/2 inch
- Height stylus tip to top mounting surface
- 17,5 mm
- Cartridge weight
- 9,6 g
- Origin
- Designed & assembled in EU
In the box
- Stylus protector
- Transparent, slide-on
- Mounting hardware
- Screws and hex key