TLE1S
Active subwoofer with two 170mm alloy-chassis drivers loaded by a 3m Advanced Transmission Line, built to pair with PMC DB1 S, TB2 S, DB1S-A II, TB2S-AII and IB1 speakers in surround setups. It suits studios and rooms where space is limited.
- Two 170mm doped drivers in cast alloy chassis
- 3m effective Advanced Transmission Line loading
- Bryston-designed 150W RMS amplifier
- Frequency response 22Hz-200Hz
- Variable roll-off 40Hz-155Hz at 12dB/octave
- 2 x XLR and 2 x RCA phono inputs
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een TLE1S verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The TLE1S is a powered subwoofer from PMC's archive range. Two custom 170mm doped drivers sit at the mouth of a transmission line with an effective length of 3m, a design the maker describes as giving deeper bass from a smaller cabinet. The built-in amplifier and crossover section was designed by Bryston and delivers 150W RMS.
The frequency response runs from 22Hz to 200Hz, and the roll-off frequency is adjustable between 40Hz and 155Hz at 12dB per octave. The cabinet has a small footprint and a set of user controls, which makes placement easier in rooms where space is tight. It was designed as the low-frequency partner for the DB1 S, TB2 S, DB1S-A II, TB2S-AII and IB1 monitors in a surround configuration.
Signal connects through two balanced XLR inputs or two RCA phono inputs, each with 20k ohm input impedance. A brochure, manual and technical drawing are available as downloads. Registering the product within 10 days of purchase extends the warranty to 20 years, subject to terms.
Specificaties
- Merk
- PMC
- Model
- TLE1S
- Categorie
- Studio › Studiomonitors
Audio
- Frequency response
- 22Hz-200Hz
- Effective ATL length
- 3m (9.8ft)
- Drive units (LF)
- 2 x doped 170mm cast alloy chassis
- Roll-off frequency
- Variable, 40Hz-155Hz @ 12dB/Oct
- Power bandwidth
- 1Hz-100kHz
- Signal to noise
- 90dB ref. 0dBu
Amplifier
- Amplifier section
- Bryston designed, 150W RMS
Inputs
- XLR inputs
- 2 x XLR, input impedance 20k Ohms
- RCA phono inputs
- 2 x RCA phono, impedance 20k Ohms
Power
- Power consumption
- 160W
Physical
- Height
- 550mm (21.6in)
- Width
- 200mm (7.80in)
- Depth
- 545mm (21.5in) + grille
- Weight
- 17.5kg (38.5lbs)
Warranty
- Extended warranty
- 20 years if registered within 10 days of purchase (T&Cs apply)