PMC8-2 XBD
The PMC 8-2 XBD is an active three-way mid-field reference monitor paired with the PMC 8-2 SUB subwoofer in a twin-cabinet format. It is aimed at professionals who need full-range monitoring in modest to larger control rooms.
- 3-way active mid-field monitor plus 8-2 SUB in twin-cabinet XBD format
- Frequency response 25 Hz - 25 kHz (-3 dB, 1 m full space, on-axis)
- Class-D amps: HF 400 W, MF 400 W, LF 2 x 400 W, SUB 2 x 400 W
- XLR analogue/AES3 input, AES3 digital through output to the sub
- SoundAlign web interface over RJ45 for single or group EQ and settings
- Max peak SPL 125 dB at 1 m for the main monitor
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een PMC8-2 XBD verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The 8-2 XBD system combines the PMC 8-2 mid-field monitor with the 8-2 SUB subwoofer so the two cabinets work as one integrated speaker. Adding the sub gives 6 dB more bass headroom than the main monitor alone, and the stated aim is consistent bass depth and dynamics at any listening level. The main monitor uses two 200 mm (8") bass drivers, a 55 mm (2") soft-dome mid-range and a 27 mm (1") soft-dome tweeter, with ATL bass loading of 3 m effective length.
In the XBD configuration the audio signal goes into the 8-2 monitor and is passed on to the sub through the digital through output. DSP in each cabinet handles crossover, driver protection, EQ, delay and polarity, and the two units are aligned acoustically. Class-D amplification is built in: 400 W each for HF and MF, 2 x 400 W for LF and 2 x 400 W for the sub in XBD mode.
Inputs are an XLR that switches between analogue and AES3 digital (16/24-bit, 18-192 kHz), with a 24-bit/96 kHz AES3 digital through output. An RJ45 network port gives access to the SoundAlign web interface for single or grouped speaker settings, and an expansion card slot is provided for future connectivity upgrades. Dedicated 19" floor stands are optional.
Video
Specificaties
- Merk
- PMC
- Model
- PMC8-2 XBD
- Categorie
- Studio › Studiomonitors
Acoustics (PMC 8-2)
- Type
- Active 3-way nearfield reference monitor with ATL bass loading
- LF drivers
- 2 x PMC 200mm (8") studio 8 drivers
- MF driver
- PMC 55mm (2") soft dome mid-range
- HF driver
- PMC 27mm (1") soft dome tweeter
- Effective ATL length
- 3m (9.8ft)
- Frequency response
- 25Hz - 25kHz (-3dB) (@1m full space, on-axis)
- Sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL
- 113dB @1m
- Max peak SPL
- 125dB @1m
- Directivity
- H +/-45 degrees, V +/-50 degrees (-6dB off axis @10kHz)
Inputs
- Input
- XLR switchable between analogue & digital AES3
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input
- 16/24-bit AES3, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
Outputs
- Output
- XLR digital AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for use with PMC SoundAlign web interface
- Expansion
- Expansion card slot for future connectivity upgrades
DSP and features
- Level trim
- +/-10dB
- High-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/-10dB
- User presets
- 3 + factory defaults
- Latency
- 2.4mS
Amplification (PMC 8-2)
- LF
- 2 x 400Wrms
- MF
- 1 x 400Wrms
- HF
- 1 x 400Wrms
PMC 8-2 SUB
- Frequency response
- 25Hz - 500Hz (-3dB) (@1m full space, on-axis)
- Max continuous SPL
- 115dB @1m
- Max peak SPL
- 121dB @1m
- Amplifier power
- 300Wrms
- Power consumption (idle / max)
- 25W / 800W
- Weight
- 37.5kg (82.7lbs) each
Power
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle)
- 50W
- Power consumption (max)
- 1500W
Physical (PMC 8-2)
- Dimensions (H x W x D)
- 534mm (21") x 551mm (21.7") x 440mm (17.3")
- Weight
- 39kg (86lbs) each