TLM 49
Large-diaphragm cardioid condenser microphone that pairs the K 47 capsule and M 49-style open headgrille with transformerless FET electronics. It suits engineers who want a vintage-style vocal sound from a 48 V phantom-powered mic, with no tube power supply.
- Fixed cardioid pattern, pressure-gradient transducer
- K 47 capsule, as in the U 47 and M 49
- Transformerless FET circuit voiced like a tube design
- Self-noise 12 dB-A, S/N 82 dB (A-weighted)
- Max SPL 110 dB at 0.5% THD, 129 dB at 5% THD
- 48 V phantom powered, XLR output; EA 3 shock mount included
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een TLM 49 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The TLM 49 is a fixed-cardioid pressure-gradient condenser microphone built around the K 47 capsule, the capsule design also used in the Neumann U 47 and M 49. It has the large, acoustically open headgrille of the M 49. Where those classics use tubes, this model has a transformerless solid-state head amplifier tuned to behave like a tube circuit.
The circuit is voiced to saturate softly at higher levels. Distortion is 0.5% at 110 dB SPL and rises gradually to 5% at 129 dB SPL. Self-noise is 12 dB-A. The sound has clear bass, a strong midrange and a gentle presence lift above 2 kHz. It is aimed mainly at vocals and also suits acoustic guitar and upright bass.
The microphone runs on standard 48 V phantom power (P48) and connects through a 3-pin XLR output, so no external power supply is needed. The set is finished in nickel and includes the EA 3 shock mount.
Video
Specificaties
- Merk
- Neumann
- Model
- TLM 49
- Categorie
- Studio › Microfoons
Audio
- Acoustical operating principle
- Pressure gradient transducer
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 13 mV/Pa = –38 dBV ± 1 dB
- Equivalent noise level, CCIR
- 23 dB
- Equivalent noise level, A-weighted
- 12 dB-A
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 71 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 82 dB
- Maximum SPL for THD 0.5%
- 110 dB
- Maximum SPL (5% THD)
- 129 dB
Outputs
- Rated impedance
- 50 ohms
- Rated load impedance
- 1 kohms
- Maximum output voltage
- -1 dBu
Connectivity
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3.2 mA
Physical
- Weight
- 825 g
- Diameter
- 78 mm
- Length
- 165 mm
- Color
- Nickel
In the box
- Microphone
- TLM 49
- Shock mount
- EA 3
- Catalogue number
- 008550