KMR 82 i
The KMR 82 i is a long shotgun microphone with a pressure-gradient interference transducer and a 45° lobe-shaped pickup pattern. It is aimed at ENG, theatre and stage dialogue, and picking out soloists or instruments from a distance.
- 45° lobe-shaped pickup pattern
- Self-noise 12 dB-A, 82 dB S/N (A-weighted)
- Max SPL 128 dB for 0.5% THD
- Switchable low cut (120 Hz) and treble filter
- 250 g, 395 mm long, 21 mm diameter
- 48 V phantom power, 0.7 mA draw
Foto’s
6Advertenties
Nog geen advertenties van dit model
Als iemand een KMR 82 i verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The KMR 82 i pairs a pressure-gradient condenser capsule with a long interference tube to give a narrow 45° acceptance angle. Its lobe pattern is described as frequency-independent, so off-axis sound is reduced in level without added coloration. This makes it easy to combine with other microphones. The response is linear up to 2 kHz, with a broad treble lift that offsets high-frequency loss over longer distances.
Self-noise is 12 dB-A, sensitivity is 21 mV/Pa and the maximum SPL is 128 dB for 0.5% THD. A high-pass filter reduces wind and handling noise. A low cut switch moves the filter to 120 Hz to offset proximity effect at shorter distances, and a second switch applies an electronic filter that offsets the capsule's treble boost to avoid sibilance on close speech.
The microphone weighs 250 g, has a balanced centre of gravity and draws only 0.7 mA from 48 V phantom power. It connects through an XLR 3 F connector. It is offered in nickel (KMR 82 i) and black (KMR 82 i mt) versions, each supplied with a WS 82 windscreen.
Video
Specificaties
- Merk
- Neumann
- Model
- KMR 82 i
- Categorie
- Studio › Microfoons
Audio
- Acoustical operating principle
- Pressure gradient interference transducer
- Directional pattern
- Supercardioid/lobe
- Pickup angle
- 45°
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 21 mV/Pa ± 1 dB
- Equivalent noise level, CCIR
- 23 dB
- Equivalent noise level, A-weighted
- 12 dB-A
- Maximum SPL for THD 0.5%
- 128 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 71 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 82 dB
Outputs
- Rated impedance
- 150 ohms
- Rated load impedance
- 1 kohms
- Maximum output voltage
- 2.6 dBu
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 0.7 mA
Physical
- Weight
- 250 g
- Diameter
- 21 mm
- Length
- 395 mm
- Colour options
- Nickel (KMR 82 i), black (KMR 82 i mt)
In the box
- Microphone
- KMR 82 i or KMR 82 i mt
- Windscreen
- WS 82