KH 810
Analog active studio subwoofer with a 10-inch woofer, 200 W amplifier and a bypassable 7.1 bass manager. It suits music, broadcast and post-production rooms that need bass down to 18 Hz for stereo, surround or 3D monitoring.
- 10" (265 mm) woofer with 200 W amplifier
- Bass response down to 18 Hz (±3 dB)
- Bypassable 7.1 bass manager, 80 Hz 4th-order crossover
- Max SPL 110.7 dB at 1 m (3% THD, 50–100 Hz average)
- Balanced XLR I/O with daisy-chain and sum outputs
- Remote control via NRC 1; REK 3 remote electronics kit
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een KH 810 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The KH 810 is a ported, wood-cabinet subwoofer built around a 265 mm long-throw woofer with a composite sandwich cone and magnetic shielding. The free-field response runs from 18 Hz (±3 dB), and the unit reaches a bass-capability maximum of 110.7 dB SPL at 1 m. A front-mounted port allows placement against a wall or flush mounting.
A built-in 7.1 bass manager can be bypassed, with a fourth-order 80 Hz crossover for compatibility with consumer formats from mono to 7.1. Eight analog channels, LFE gain of 0 or +10 dB and four LFE routing modes cover different system layouts. Controls include input gain, output level, an 8-position phase switch with test tone, a continuous low cut, a bypassable parametric EQ, a volume control and ground lift.
Inputs and outputs are electronically balanced XLR. A daisy-chain output and a sum output allow larger systems and Plane Wave Bass Array setups. It can be controlled with the NRC 1 hardware remote, with SEA 1 adapter and RS-232 control also listed. The optional REK 3 kit lets the electronics be located remotely. A universal 100–240 V power supply and a trigger input for remote power-on are included.
Video
Specificaties
- Merk
- Neumann
- Model
- KH 810
- Categorie
- Studio › Studiomonitors
Acoustics
- Free field frequency response ±6 dB
- 17 … 600 Hz
- Free field frequency response ±3 dB
- 18 … 300 Hz
- Self-generated noise at 10 cm
- <20 dB(A) SPL
- Sine wave output, THD < 0.5 % at 1 m in half space
- 95 dB SPL (>45 Hz)
- Max. SPL in half space at 3% THD at 1 m (50–100 Hz average)
- 110.7 dB SPL
- Max. long term SPL, pink noise at 2.3 m (single / pair full range)
- 112 dB SPL
- Dolby DARDT max SPL bass managed
- 119 dB
Audio
- Controller design
- Analog, active
- Crossover frequency
- 80 Hz
- Crossover slope
- 24 dB/oct; 4th order
- LFE gain
- 0 and +10 dB
- LFE routing modes
- 4
Inputs and Outputs
- Analog inputs and outputs
- XLR, electronically balanced
- Additional outputs
- Daisy chain output, Sum output
- Analog channels
- 8
Connectivity
- Remote control
- NRC 1 and SEA 1 hardware remote; RS-232 control possible
- Power-on trigger
- 0 V and 12 V trigger modes
Power
- Woofer amplifier output power (10% THD+N, limiter off)
- 200 W
- Woofer amplifier output power (0.1% THD+N, limiter off)
- 160 W
- Power consumption, idle (230 V / 100 V)
- 20 W
- Power consumption, full output (230 V / 100 V)
- 290 W
- Power supply
- Universal switched-mode, 100 … 240 V
Physical
- Woofer
- 265 mm (10") with magnetic shielding and black metal grille
- Cabinet material
- Wood cabinet, aluminum electronics panel
- Dimensions (H x W x D)
- 360 x 330 x 645 mm (14.2" x 13" x 25.4")
- External net volume
- 76.6 liters
- Weight
- 26 kg (57 lbs 5 oz)
- Operating conditions
- +10° C to +40° C; <75% RH, non-condensing
In the box
- KH 810 G delivery
- 1 x KH 810 Subwoofer, 3 x mains cables (EU, UK, US), 1 x Getting Started Quickly guide, 1 x Operating Manual
- KH 810 G CCC delivery
- 1 x KH 810 Subwoofer, 2 x mains cables (CCC + KC), 1 x Getting Started Quickly guide, 1 x Operating Manual
- Packed dimensions (H x W x D)
- 515 x 490 x 750 mm (20 1/4" x 19 1/4" x 29 1/2")
- Packed weight
- 32.0 kg (70 lbs 9 oz)