Ci130QRfl
Round, frameless flush-mount architectural loudspeaker from KEF's Ci-Q Series, built around a 130 mm Uni-Q driver array. Intended for in-wall or in-ceiling installs in new builds and retrofits.
- Round flush-mount, frameless architectural speaker
- 130 mm (5.25 in.) Uni-Q driver with 19 mm HF unit
- Tangerine Waveguide, 130° nominal coverage
- Sensitivity 87 dB, 8 ohm nominal impedance
- Cut-out 158 mm x 158 mm, 101 mm mounting depth
- Square-format version available as Ci130QSfl
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een Ci130QRfl verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Ci130QRfl is a round, frameless in-wall/in-ceiling speaker that sits flush with the surface. It is aimed at new construction and retrofit jobs where a clean, minimal look matters. It belongs to the Ci-Q Series and has a square-format sibling, the Ci130QSfl, which uses identical drivers.
Sound comes from a 130 mm (5.25 in.) Uni-Q driver with a 19 mm (0.75 in.) high-frequency element, so the speaker works as a single point source. A Tangerine Waveguide is combined with the Uni-Q array to spread sound across the room, with a nominal coverage of 130 degrees. The crossover sits at 3.8 kHz, and frequency response is rated 45 Hz - 34 kHz (±6 dB) in an open-backed installation.
The speaker is a passive 8 ohm model rated at 87 dB sensitivity, with a recommended amplifier power of 10-100 W and a suggested 50 Hz high-pass filter. It needs a 158 x 158 mm cut-out and 101 mm of mounting depth. Rear volume guidance is 10 L minimum and 15 L ideal. Downloads such as the manual, cut-out template, spec sheets and EASE GLL data are offered by the maker.
Specificaties
- Merk
- KEF
- Model
- Ci130QRfl
- Categorie
- Hi-Fi en home-audio › Speakers
Audio
- Frequency response
- 45Hz - 34kHz (±6DB) Open-Backed
- Frequency range
- 38Hz-30kHz (-10DB)
- Sensitivity
- 87dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Nominal coverage
- 130
- Maximum SPL measured at 1m
- 103 dB
- Crossover frequency
- 3.8kHz
Drivers
- Drive units
- LF: 130mm (5.25in.) Uni-Q; HF: 19mm (0.75in.)
Amplification
- Recommended amplifier power
- 10-100W
- Recommended high-pass filter
- 50Hz
Installation
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 101mm (3.98in.)
- Ideal rear volume
- 15 L
- Minimum rear volume
- 10 L
Physical
- Net weight
- 1.45kg (3.19Ibs.)
- External dimensions (H x W x D)
- 200.6 mm x 200.6 mm x 104.6 mm (7.9 in. x 7.9 in. x 4.12 in.)
- Shape
- Round
- Series
- Ci-Q Series