Ci130.2CR
The Ci130.2CR is a 5.25-inch round in-ceiling speaker from KEF's Ci-C architectural series, built around a Uni-Q coaxial driver array. It suits custom-install projects, including damp or UV-exposed rooms, and fits where installation depth is limited.
- 5.25 in. (130 mm) Uni-Q coaxial driver array
- 16 mm aluminium dome tweeter with waveguide
- IP64 certified, weather resistant
- 77.7 mm mounting depth from surface
- Magnetic, paintable grille and bezel
- 8 ohm, 87 dB sensitivity, 10-80 W amplifier
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een Ci130.2CR verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Ci130.2CR is an in-ceiling speaker in KEF's Ci-C Series, the entry point to the maker's custom-installation range. It uses a Uni-Q driver array in which a 16 mm aluminium dome tweeter with a waveguide sits at the acoustic centre of the 130 mm bass/midrange cone. The two drivers act as a single point source, so sound spreads widely and evenly through the room.
The cabinet is very shallow, with a mounting depth of 77.7 mm from the surface, so it can go into ceilings where deeper speakers will not fit. The speaker has a weather-resistant treatment against moisture and UV light and an IP64 rating. Ultra-Thin Bezels and a flat magnetic grille keep it visually discreet, and both the grille and the bezel can be painted to match the ceiling.
It is a passive 8-ohm speaker for use with a separate amplifier rated at 10-80 W. Software for the Ci range is offered through the maker's Ci software download page.
Specificaties
- Merk
- KEF
- Model
- Ci130.2CR
- Categorie
- Live geluid › Overig live geluid
Audio
- Frequency response
- 52Hz-20kHz (+/-6dB) open-backed
- Sensitivity
- 87dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Recommended amplifier power
- 10-80W
Drivers
- LF driver
- 130mm (5.25in.) Uni-Q
- HF driver
- 16mm (0.6in.)
- Tweeter
- 16mm (0.6in.) Aluminium dome tweeter with tangerine waveguide
Features
- Bezel
- UTB™ Ultra-Thin Bezel
- Grille
- Magnetic grille
- Finish
- Paintable grille and bezel
- Weather resistance
- Weather Resistant
- Ingress protection
- IP64 certified
Physical
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 77.7mm (3.06in.)
- External dimensions (H x W x D)
- 193.4 mm x 193.4 mm x 82.3 mm (7.61 in. x 7.61 in. x 3.24 in.)
- Net weight
- 1.3kg (2.8lbs)