
Nova3
The NOVA3 is a large-diaphragm condenser microphone with a 34 mm double-sided capsule and switchable cardioid, omnidirectional and figure-8 patterns. It is aimed at vocals, broadcast, acoustic instruments and amplifier recording.
- 34 mm double-sided large-diaphragm capsule
- Cardioid, omnidirectional and figure-8 patterns
- Switchable -10 dB pad and low cut filter (below 100 Hz)
- Frequency range 20 Hz to 20 kHz
- +48 V phantom power, 3-pin XLR male output
- Includes shock mount, magnetic pop filter and metal case
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een Nova3 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The NOVA3 is a pressure-gradient electrostatic condenser microphone built around a hand-built, double-sided 34 mm large-diaphragm capsule that is shock-mounted inside the body. Three polar patterns can be selected: cardioid for vocals and general sources, omnidirectional for wide sources, rooms or moving performers, and figure 8 for duets or face-to-face interviews.
A 10 dB pad helps with loud sources such as guitar cabinets, loud singers or a drum kit. A low cut switch removes content below 100 Hz to reduce low-frequency rumble. Components include Wima capacitors and Fairchild resistors, and the body has an electroplated finish.
The microphone outputs on a 3-pin XLR male connector and runs on +48 V phantom power with a current draw of 4 mA or less. It ships with a suspension shock mount, a magnetic slip-on pop filter and a metal storage carry case. User manuals are available in six languages.
Video
Specificaties
- Merk
- iCON
- Model
- Nova3
- Categorie
- Studio › Microfoons
Audio
- Transducer type
- Electrostatic
- Operating principle
- Pressure Gradient
- Diaphragm active diameter
- 34 mm
- Frequency range
- 20 Hz to 20 kHz
- Polar patterns
- Cardioid, Figure 8, Omnidirectional
- Sensitivity (dB re 1V/Pa)
- (-37dBV/Pa)(-40dBV/Pa)(-38dBV/Pa)
- Sensitivity at 1 kHz into 1000 Ω load
- (-14,10,12.5)mV/Pa
- Maximum SPL for 0.5% THD at 1000 Ω load
- 144dB/ 147dB/ 147dB
- S/N ratio DIN/IEC 651 A-weighted
- 78dB/ 75dB/ 75dB
- Dynamic range of microphone preamplifier
- 128dB
Controls
- Pad
- -10 dB switchable
- Low cut filter
- Below 100 Hz
Inputs and Outputs
- Output impedance
- 50Ω
- Rated load impedance
- 1000Ω
- Suggested load impedance
- > 500Ω
- Output connector
- 3-pin XLR male
Power
- Phantom power voltage (pins 2 & 3 of XLR)
- +48V (+/-4V)
- Current consumption
- ≤ 4mA
Physical
- Dimensions
- 63mm x 60mm x 154mm
- Weight
- 0.394kg
In the box
- Mounting
- Suspension shock mount
- Pop filter
- Magnetic slip-on pop filter
- Case
- Metal storage carry case