1235A
Large wall-mountable active main monitor in Genelec's SAM series, based on the earlier 1035 and updated with 96 kHz processing. It suits control rooms that need high output over long listening distances and room calibration through GLM software.
- Three-way active main monitor, 164 kg
- 2 x 381 mm bass, 2 x 125 mm midrange, 25 mm treble
- Class D amps: 2x1000 W bass, 2x400 W mid, 250 W treble
- Frequency response 29 Hz - 26 kHz (-6 dB)
- Long term max SPL ≥124 dB, short term ≥130 dB
- GLM and AutoCal 2 room calibration over RJ45
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een 1235A verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The 1235A is a three-way active main monitor built around two 381 mm bass drivers, two 125 mm midrange drivers and a 25 mm compression treble driver. Each driver group has its own Class D amplifier in a separate rack-mounted amplifier unit, and an active crossover splits the signal ahead of the amplifiers. A Directivity Control Waveguide shapes the dispersion to keep the response consistent off axis, and driver protection circuitry lowers the level when limits are reached.
As a Smart Active Monitoring model, it works with Genelec's GLM software and AutoCal 2 calibration, which adjusts level, delay and room response compensation for the listening space. Settings can be stored in the monitor so they remain if the GLM network is disconnected. Calibration needs the free GLM software plus a 9320A SAM Reference Controller or a GLM Calibration Kit, both sold separately. Intelligent Signal Sensing puts the monitor into a low-power sleep state when no signal is present, and it can be switched off on the back panel.
It has an analogue XLR input, an AES/EBU XLR input and output, and two RJ45 connectors for the GLM network. It is available complete or as an upgrade kit for owners of 1035A or 1035B models.
Specificaties
- Merk
- Genelec
- Model
- 1235A
- Categorie
- Studio › Studiomonitors
Audio
- Frequency response (±2 dB)
- 31 Hz - 20 kHz
- Frequency response (-6 dB)
- 29 Hz - 26 kHz
- Peak SPL (per pair, at 2 m)
- ≥135 dB
- Short term max SPL (at 1 m)
- ≥130 dB
- Long term max SPL (at 1 m)
- ≥124 dB
- Self-generated noise
- ≤5 dB SPL (A-weighted, 2 m)
- Group delay (Extended Phase Linearity off)
- 5.2 ms
Drivers
- Bass
- 2 x cone, 381 mm
- Midrange
- 2 x cone, 125 mm
- Treble
- Compression, 25 mm (1 in) throat
Amplification
- Bass amplifier
- 2 x 1000 W Class D
- Midrange amplifier
- 2 x 400 W Class D
- Treble amplifier
- 250 W Class D
Inputs
- Analog input
- 1 x XLR female, balanced, 10 kOhm
- AES/EBU input
- 1 x XLR female, 110 Ohm
Outputs
- AES/EBU output / Thru
- 1 x XLR male, 110 Ohm
Connectivity
- GLM network control
- 2 x RJ45 (CAT5)
Power
- Mains voltage
- 100-120 VAC / 220-230 VAC, 50/60 Hz
- Power consumption, ISS active
- ≤6 W
- Power consumption, idle
- ≤40 W
- Power consumption, full output
- 2400 W
Physical
- Monitor dimensions (H x W x D)
- 820 x 1105 x 650 mm
- Monitor weight
- 164 kg (361.6 lb)
- Amplifier unit size
- 3U rack, 483 mm wide, 286 mm deep
- Amplifier unit weight
- 11.2 kg (24.7 lb) each
In the box
- Contents
- 1 x 1235A monitor, 1 x calibrated RAM-XL amplifier unit
- Cables
- Mains 1.8 m, RJ45 5 m and 10 m, 2 x 4-pole Speakon 10 m
- Documentation
- Operating manual
- Warranty
- 2 years, plus 3 years extended when registered