
Nano Pulsar
Analog stereo tremolo and panner pedal in a compact Nano-sized enclosure, aimed at guitarists who want adjustable waveform shapes from smooth to choppy. It runs in mono or stereo and includes a Volume control to compensate for level loss.
- Analog tremolo and stereo panner
- Triangle/Square mode switch with Shape knob
- Rate range of about 20 seconds to 30 Hz
- Volume control with up to 12 dB boost
- Mono or stereo operation via two outputs
- 9V battery included; buffered bypass
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een Nano Pulsar verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Nano Pulsar is an analog tremolo and auto-panner with a Shape knob that morphs the modulating waveform. A switch selects between a triangle-based mode (rising sawtooth through triangle to falling sawtooth) and a square-based mode (narrow pulse through square to wide pulse). Rate covers roughly 20 seconds per cycle up to 30 Hz, so it can move from slow swells into ring-modulation-like sounds when Rate and Depth are pushed high.
Depth sets the amount of tremolo, with the widest dynamic range and widest stereo field at about the 1 o'clock position. Turned further, the modulation becomes asymmetric and swings the signal between positive and negative phase, giving a warped, synth-like tremolo. A Volume control can add up to 12 dB of boost to offset the level drop that tremolo often causes.
There is one input and two outputs (Mono/Left and Right). The Right output carries the same effect with the waveform shapes reversed, which makes stereo panning possible with two amplifiers. A footswitch toggles buffered bypass, and the status LED pulses at the modulation rate. Power comes from the included 9V battery or an optional center-negative 9V supply.
Video
Specificaties
- Merk
- Electro-Harmonix
- Model
- Nano Pulsar
- Categorie
- Effecten en pedalen
Controls
- Knobs
- Volume, Depth, Shape, Rate
- Mode switch
- Triangle Wave / Square Wave
- Rate range
- Approx. 20 seconds to 30 Hz
- Volume boost
- Up to 12 dB
- Footswitch
- Toggles buffered bypass / effect
- Status LED
- Pulses at modulation rate when engaged
Inputs
- Input
- 1 x input jack
Outputs
- Outputs
- Mono/Left and Right, 1/4" mono jacks
- Audio
- Stereo Out
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 30mA
- Power jack
- 9VDC, center-negative; do not exceed 12VDC
Physical
- Dimensions
- 4.5 x 2.75 x 2.1 in
- UPC
- 683274012360
In the box
- Included
- 9V battery