OC7
Small-diaphragm cardioid condenser microphone for close-miking instruments, drums and amplifiers. It has a 220° swivel head, a transformerless output and a metal body, and suits stage and studio use.
- Small-diaphragm true condenser, cardioid pattern
- 220° swivel head for tight placement
- Max SPL 154 dB, above 160 dB with pad
- Low cut at 40 Hz or 80 Hz, -10 dB pad
- Transformerless output, 3-pin XLR
- Metal body, made in Vienna
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een OC7 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The OC7 is a small-diaphragm true condenser microphone with a cardioid pattern, designed for close-miking acoustic guitar, snare and other drums, and amplifiers. It uses the OCC7 capsule, a design inspired by the CK1, together with a transformerless output. The result is a linear frequency response from 20 Hz to 20 kHz and handling of sound pressure levels up to 154 dB, or above 160 dB with the pad engaged.
A swivel joint lets the head rotate through 220°, so the capsule can be aimed accurately in tight spots without moving the stand. The all-metal enclosure is built to survive an accidental hit from a drumstick. The microphone is made in Vienna.
On the control side it has two switchable low cut filters, at 40 Hz and 80 Hz, plus a -10 dB pad. It connects through a 3-pin XLR output and needs 48 V phantom power. Optional accessories include the DPH12 drum holder and the SB1 stereo bar.
Video
Specificaties
- Merk
- Austrian Audio
- Model
- OC7
- Categorie
- Studio › Microfoons
Audio
- Transducer
- True condenser, small diaphragm (OCC7 capsule)
- Directional characteristic
- Cardioid
- Frequency range
- 20 Hz - 20 kHz
- Sensitivity
- 10 mV/Pa
- Equivalent noise level
- 19 dB SPL(A)
- Max. SPL
- 154 dB SPL (> 160 dB SPL with pad)
Controls
- Low cut filter
- 40 Hz (2nd order), 80 Hz (2nd order)
- Switchable pad
- -10 dB
- Swivel head rotation
- 220°
Outputs
- Main connector
- XLR 3 pin
- Impedance
- 275 Ω (symmetrical)
- Load impedance
- > 1 kΩ
- Output stage
- Transformerless
Power
- Supply voltage
- 48 V (< 2 mA)
Physical
- Dimensions
- 147 x 82 x 54 mm
- Weight
- 275 g
- Enclosure
- Metal
- Origin
- Made in Vienna
Accessories (optional)
- DPH12
- Drum holder for OC7/OD5/CC8
- SB1
- Stereo bar