X2· Platenspelers
The X2 is a belt-drive turntable with a 9-inch carbon/aluminium sandwich tonearm, 2 kg acrylic platter and electronic 33/45/78 RPM speed change. It suits vinyl listeners wanting an adjustable high-end deck, and has since been superseded by the X2 B.
- Belt drive, 33/45/78 RPM with electronic speed change
- 30 mm thick, 2 kg acrylic platter
- 9" carbon/aluminium sandwich one-piece tonearm
- Adjustable azimuth and VTA
- Optional Pick it 2M Silver cartridge
- Connect it E semi-balanced RCA phono cable included
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een X2 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The X2 is a belt-drive turntable built around a 30 mm, 2 kg acrylic platter and a stainless steel/brass main bearing. A DC/AC generator board supplies the motor, and speed is switched between 33, 45 and 78 RPM with a single button. The motor chassis is balanced and suspended on a tuned TPE belt, which decouples it from the main plinth.
The 9" one-piece carbon/aluminium sandwich tonearm has no separate headshell and a wider tube than the X1's arm. Its extra mass suits low-compliance MC cartridges. Azimuth and VTA are fully adjustable, and the arm comes with a TPE-damped counterweight. Three height-adjustable damped aluminium feet support the deck. It can be bought with or without the Pick it 2M Silver cartridge, which uses silver-plated copper coils, and is offered in High Gloss, Satin and Real Wood finishes.
The deck connects to an amplifier's phono input through the supplied Connect it E semi-balanced RCA phono cable. It is powered by an external 15 V DC power supply. This page covers the original X2; an updated X2 B with a True Balanced Connection is also available.
Video
Specificaties
- Merk
- Pro-Ject
- Model
- X2
- Categorie
- Hi-Fi en home-audio › Platenspelers
Drive
- Speeds
- 33, 45, 78 (electronic speed change)
- Principle
- belt drive
- Speed variance
- 33: 0.25% 45: 0.20%
- Wow & flutter
- 33: 0.12% 45: 0.10%
- Signal to noise
- 70 dB
Platter and bearing
- Platter
- 30mm thick, 2 kg heavy acryl
- Main bearing
- stainless steel/brass
Tonearm
- Tonearm
- 9” carbon/aluminium sandwich
- Effective arm length
- 230 mm
- Overhang
- 18 mm
- Effective tonearm mass
- 13,5g
- Tracking force range
- 0 - 30mN
Connectivity
- Phono cable
- Connect it E, semi-balanced RCA
Power
- Power supply
- 15 volts DC / 0,8A
- Power consumption
- 4,5 watts max / 0.3 watt standby
Physical
- Dimensions
- 460 x 150 x 340 mm (WxHxD)
- Weight
- 10 kg
- Finishes
- High Gloss, Satin, Real Wood
In the box
- Included accessories
- 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
- Cartridge
- Available with or without Pick it 2M Silver