PMC6
Active two-way nearfield reference monitor with a 6-inch bass driver, 1-inch soft-dome tweeter and ATL bass loading, powered by two 200W Class-D amplifiers. Aimed at professionals in compact control rooms and immersive multi-speaker setups.
- Active 2-way nearfield monitor with ATL bass loading
- 150mm (6") LF driver and 27mm (1") soft-dome tweeter
- Two 200W Class-D amplifiers, one per driver
- Switchable analogue / AES3 digital XLR input
- Automatic portrait/landscape DSP correction
- PMC8 SUB adds XBD mode with bass down to 25Hz
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een PMC6 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The PMC6 is a compact active studio monitor built around a 150mm (6") bass driver with 20mm of excursion and a 27mm (1") fabric soft-dome tweeter on a shallow waveguide. The bass driver works with ATL bass loading and Laminair airflow technology, and the tweeter is chosen for wide, consistent dispersion. Each driver has its own 200W Class-D amplifier.
A DSP engine handles the crossover, driver protection, EQ, delay and polarity. It also corrects automatically for portrait or landscape placement. Controls include level trim, a high-pass filter, LF and HF shelving filters, five-band parametric EQ and user presets. Settings can be made from the rear panel or through the SoundAlign browser interface. A ceiling-mount yoke allows suspension in multichannel or immersive systems.
The XLR input switches between analogue and AES3 digital, with a digital AES3 through output and an RJ45 network port for SoundAlign. An expansion card slot is provided for future connectivity upgrades. Adding a PMC8 SUB and switching on the XBD DSP mode creates the PMC6 XBD system, with low-frequency extension down to 25Hz.
Video
Specificaties
- Merk
- PMC
- Model
- PMC6
- Categorie
- Studio › Studiomonitors
Audio
- Type
- Active 2-way nearfield reference monitor with ATL bass loading
- LF driver
- PMC 150mm (6") studio 6 driver
- HF driver
- PMC 27mm (1") soft dome tweeter
- Effective ATL length
- 1.8m (5.9ft)
- Frequency response
- 39Hz - 25kHz (-3dB) (@1m full space, on-axis)
- Sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL
- 106dB @1m
- Max peak SPL
- 118dB @1m
- Directivity
- H +/-60 degrees, V +50/-40 degrees (-6dB off axis @10kHz)
- Latency
- 2.4mS
Inputs
- Input
- XLR switchable between analogue & digital AES3
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input
- 16/24-bit AES3 signal, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
- Expansion card slot
- For future connectivity upgrades
Outputs
- Output
- XLR digital AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for use with PMC SoundAlign web interface
DSP and controls
- Level trim
- +/-10dB
- Orientation
- Portrait, landscape, auto
- High-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Phase
- Normal or inverted
- LF & HF shelving filters
- 20Hz - 20kHz, +/- 10dB, Q 0.707
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/- 10dB
- User presets
- 3 + factory defaults
Power
- Amplifier power, LF
- 1 x 200Wrms
- Amplifier power, HF
- 1 x 200Wrms
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle)
- 35W
- Power consumption (max)
- 400W
Physical
- Dimensions, portrait (H x W x D)
- 400mm (15.7") x 215mm (8.5") x 372mm (14.6")
- Dimensions, landscape (H x W x D)
- 215mm (8.5") x 400mm (15.7") x 372mm (14.6")
- Weight
- 11.1kg (24.4lbs) each