2M Black Verso
Phono cartridge in Ortofon's 2M series, built for bottom-mount headshells. It is the top model of the 2M range, with a Nude Shibata stylus, for vinyl listeners who want detailed playback.
- Bottom-mount version of the 2M Black
- Nude Shibata diamond stylus, r/R 6/50 µm
- Aluminium cantilever, silver-plated OFC coil wire
- Split pole pin motor design
- Tracking force 1.4-1.7 g, 1.5 g recommended
- Output 5 mV, recommended load 47 kOhm
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een 2M Black Verso verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The 2M Black Verso is a moving-magnet phono cartridge from the 2M series, made for turntables with headshells that mount from underneath. It is the top model of the range and pairs a Nude Shibata diamond stylus with an aluminium cantilever. The slim, polished stylus profile gives a wide contact area with the groove walls.
The motor uses Ortofon's split pole pin design, upgraded with silver-plated copper coil wire. The 2M series is designed to fit the most common turntables in weight and size. The Verso variant uses a removable top plate, and the two M2.0 mm screws can be swapped in by following a step-by-step replacement guide. A Torx 8 key and a mounting tool are part of the process.
The cartridge weighs 7.2 g and is rated for a tracking force of 1.4-1.7 g, with 1.5 g recommended. It works with a standard moving-magnet phono input, with a recommended load of 47 kOhm and 150-300 pF. A downloadable user guide is available.
Specificaties
- Merk
- Ortofon
- Model
- 2M Black Verso
- Categorie
- DJ-apparatuur › Elementen en naalden
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 5 mV
- Channel balance at 1 kHz
- 1 dB
- Channel separation at 1 kHz
- 26 dB
- Frequency response 20 Hz - 20 kHz
- 2 / - 0 dB
- Internal impedance, DC resistance
- 1.2 kOhm
- Internal inductance
- 630 mH
- Recommended load resistance
- 47 kOhm
- Recommended load capacitance
- 150-300 pF
Stylus and Tracking
- Stylus type
- Nude Shibata
- Stylus tip radius
- r/R 6/50 µm
- Cantilever material
- Aluminium
- Tracking ability at 315 Hz
- 80 µm
- Compliance, dynamic, lateral
- 22 µm/mN
- Tracking force range
- 1.4-1.7 g (14-17 mN)
- Tracking force, recommended
- 1.5 g (15 mN)
- Tracking angle
- 20°
Construction
- Coil system
- Silver-plated OFC Coil Wire
- Coil wire material
- Silver-plated OFC Coil Wire
- Cartridge body material
- Polymer and aluminum
- Cartridge colour
- Black/Black
- Mounting type
- Half inch bottom mount
Physical
- Cartridge weight
- 7.2 g
- Premounted cartridge weight
- 16.7 g