Ci160CSDS
A thin-bezel, flush-mount in-ceiling speaker with two drive units that reproduces stereo from a single enclosure. It suits rooms where only one speaker position is available, including damp spaces such as bathrooms or areas under eaves.
- Dual stereo in-ceiling speaker for single-position rooms
- 160 mm LF and 19 mm HF drivers
- Screw-down clamp with moisture-resistant fixings
- Suitable for bathrooms and under eaves
- 194 x 194 mm cut-out, 84.5 mm depth without back can
- 91 dB sensitivity, 8 ohm nominal impedance
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een Ci160CSDS verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Ci160CSDS is a dual stereo in-ceiling speaker, meaning one enclosure is designed to recreate a stereo image where there is room for just a single speaker. It pairs a 160 mm (6.5 in.) low-frequency driver with a 19 mm (0.75 in.) high-frequency driver and has a thin bezel for a flush finish.
Installation uses a screw-down clamping system with moisture-resistant fixings, so the speaker can be fitted in environments such as bathrooms or beneath eaves. The cut-out is 194 mm x 194 mm, and the speaker needs 84.5 mm of mounting depth from the surface without the back can. External dimensions are 223 mm x 223 mm x 90.5 mm, and net weight is 1.80 kg.
Electrically it is a passive 8 ohm design with a sensitivity of 91 dB (2.83 V / 1 m) and a stated frequency response of 50 Hz to 20 kHz (±6 dB) when open backed. It is part of the maker's architectural speaker range, and software is available from the maker's Ci software download page.
Specificaties
- Merk
- KEF
- Model
- Ci160CSDS
- Categorie
- Hi-Fi en home-audio › Speakers
Audio
- Frequency response
- 50Hz - 20kHz (±6dB) open backed
- Sensitivity
- 91dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Type
- Thin-bezel in-ceiling dual stereo speaker
Drivers
- LF driver
- 160mm (6.5in.)
- HF driver
- 19mm (0.75in.)
Installation
- Cut-out dimensions (H x W)
- 194 mm x 194 mm (7.64 in. x 7.64 in.)
- Cut-out remarks
- Without back can
- Mounting depth from surface
- 84.5mm (3.33in.) Without back can
- Mounting method
- Screw down clamping system with moisture-resistant fixings
Physical
- External dimensions (H x W x D)
- 223 mm x 223 mm x 90.5 mm (8.78 in. x 8.78 in. x 3.56 in.)
- Net weight
- 1.80kg (4.0lbs.)
- Range
- Architectural Speakers