Spruce Goose
Analog overdrive pedal based on a Bluesbreaker-style circuit, with a three-position LIFT input-gain switch and an active bass control. Aimed at guitarists wanting amp-like breakup from light crunch to saturated lead, plus a momentary boost option.
- Bluesbreaker-inspired analog overdrive
- 3-position LIFT switch: 0, 9 dB or 21 dB input gain
- Active BASS knob, flat at noon, plus TREBLE, GAIN and VOL
- Relay true bypass with latching and momentary footswitch action
- Runs on 9V battery (included) or optional center-negative supply
- Draws 20mA
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een Spruce Goose verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Spruce Goose is a mono analog overdrive built around a Marshall Bluesbreaker-inspired circuit. It aims for natural, amp-like breakup that keeps dynamics and clarity, with an output range extended beyond the original design.
A three-position LIFT switch sets how much gain is applied ahead of the drive stage: none in the low position, 9 dB in the middle and 21 dB in the high position. GAIN sets the amount of drive, VOL sets output level, and tone is shaped by a TREBLE knob and an active BASS knob that is flat at noon and boosts or cuts low end either side of it. The bass control can add weight to single-coil guitars or tighten warmer humbuckers.
Switching is true bypass using a mechanical relay. A tap on the footswitch latches the effect on and off, while holding it for more than half a second gives momentary engagement; the momentary action can be disabled. The pedal runs on an included 9V battery or an optional center-negative power supply, and has a mono input and output jack.
Video
Specificaties
- Merk
- Electro-Harmonix
- Model
- Spruce Goose
- Categorie
- Effecten en pedalen
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- LIFT low position
- No additional gain
- LIFT mid position
- 9dB of gain
- LIFT high position
- 21dB of gain
Controls
- Knobs
- VOL, GAIN, TREBLE, BASS (active)
- Switches
- 3-position LIFT switch
- Footswitch
- Soft footswitch, latching and momentary action
- Status indicator
- LED lit when engaged
Inputs
- Input jack impedance
- 680kΩ
Outputs
- Output jack impedance
- 550Ω
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 20mA
- Power jack
- 9VDC, center-negative; do not exceed 12VDC
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
In the box
- Battery
- 9V battery included