IS-AMP1275-BK
The IS-AMP1275-BK is a 12-channel Class D multi-zone integrated amplifier from ELAC's Integrator series, delivering 75 W per channel. It is aimed at custom-install and multi-room projects that need flexible routing, DSP and third-party control.
- 12 input and 12 output channels, 75 W per channel
- Full matrix routing of any input to any output
- 8 assignable outputs, high-pass filters for in-ceiling speakers
- Parametric EQ per output with ELAC speaker presets
- Web GUI setup with status and level metering
- IP control for Control4 and Crestron; 2 RU
Foto’s
6Advertenties
Nog geen advertenties van dit model
Als iemand een IS-AMP1275-BK verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The IS-AMP1275-BK is a modular 12-channel amplifier using discrete Class D topology. Each channel is rated at 75 W into 4 and 8 ohms, and outputs can be bridged for 150 W. Of the 12 outputs, 8 are assignable, so a room can be driven from in-ceiling speakers while one output feeds a powered subwoofer in the same room. High-pass filters can be applied to in-ceiling and in-wall speakers.
Audio routing is a full matrix handled by DSP and a CPLD, so any input can be sent to any output. Every output has a full parametric equalizer, and presets for ELAC speakers are available to simplify setup. Setup and tuning are done through a web-based interface with a status screen showing channel state and input and output levels. Settings can be saved to replicate them across projects.
For reliability, each zone has a 16-bit microprocessor that monitors voltage, current and temperature. The system watches 10 thermal points using 10 microprocessors, 3 DSPs and 1 CPLD. IP commands are available for Control4 and Crestron, and the unit occupies 2 rack units.
Specificaties
- Merk
- ELAC
- Model
- IS-AMP1275-BK
- Categorie
- Hi-Fi en home-audio › Versterkers
Inputs
- Input channels
- 12
Outputs
- Output channels
- 12
- Assignable outputs
- 8
- Power output per channel @ 4 ohms
- 75 W
- Power output per channel @ 8 ohms
- 75 W
- Bridged output power
- 150 W
Audio
- Topology
- Discrete Class D
- Frequency response
- 20 Hz - 20 KHz
- DSP
- Full matrix routing, parametric EQ per output
- Monitoring
- 10 thermal points, 10 microprocessors, 3 DSP, 1 CPLD
Connectivity
- Setup interface
- Web GUI
- IP commands (third party control)
- Control4, Crestron
Physical
- Dimensions (width x length)
- 425.45 mm x 346.08 mm
- Rack spacing
- 2 RU
Software
- Firmware version listed
- 0.7.0
- Control4 driver version listed
- 1.0.0