Afterneath Eurorack
A 16HP Eurorack version of the Afterneath reverb with a fully analog dry path and a fully digital wet path. It suits modular players who want a modulatable, self-oscillating reverb/delay with CV control and an external feedback loop.
- 16HP Eurorack reverb with analog dry and digital wet paths
- Four CV inputs (Drag, Mode, Diffuse, Length) with attenuverters
- Nine Drag modes, including 1V/octave and quantized scales
- Reflect Send/Return jacks for external feedback processing
- Input level handles instrument-level to modular-level signals
- Draws 95 mA from +12V; skiff friendly at 31.75 mm deep
Foto’s
7Advertenties
Nog geen advertenties van dit model
Als iemand een Afterneath Eurorack verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The Afterneath module is a digital reverb built from many short delay lines, packaged for Eurorack. It has one audio input, one audio output, a Reflect send and return pair for the feedback path, and nine front-panel controls. The dry signal stays analog, while the wet signal is entirely digital.
The Drag control separates the delay lines, moving the sound between delay-like and reverb-like behaviour and shifting pitch when sound is in the buffer. Mode selects one of nine response curves for Drag and its CV input, including unquantized, slewed, 1V/octave and several quantized scales. Dampen, Diffuse, Length, Reflect and Mix shape tone, smoothness, decay, regeneration and wet/dry balance, and Dry Kill removes the dry signal. High Length and Reflect settings cause self-oscillation.
Drag, Mode, Diffuse and Length each have a CV input with a dedicated attenuverter. The Input knob adapts the level from instrument-level to modular-level sources. Reflect Send and Return allow external processing of the feedback path, and Return can also work as an extra audio input. The module uses a standard 10-pin power header and is shallow enough for skiff cases.
Video
Specificaties
- Merk
- EarthQuaker Devices
- Model
- Afterneath Eurorack
- Categorie
- Synths en keyboards › Modulair (Eurorack)
Inputs
- Audio input
- 1 (instrument-level to modular-level, set by Input knob)
- Reflect Return
- 1 (also usable as an additional audio input)
- CV inputs
- 4 (Drag, Mode, Diffuse, Length)
- Drag CV response range
- 1.6 V to 4.1 V (positive voltages only)
Outputs
- Audio output
- 1
- Reflect Send
- 1 (does not interrupt the internal feedback path)
Controls
- Knobs
- Input, Dampen, Reflect, Mix, Drag, Mode, Diffuse, Length
- Switch
- Dry Kill
- CV attenuverters
- 4 (Drag, Mode, Diffuse, Length)
- Mode indicator
- Mode LED
- Total controls
- 9
Audio
- Dry signal path
- Completely analog
- Wet signal path
- Totally digital
- Drag modes
- 9
- Quantized modes
- Chromatic, Major, Minor, Pentatonic, Octaves & Fifths, Octaves (1V/octave)
- Other modes
- Unquantized, Unquantized with Slew, Unquantized Volt/Octave
Power
- Current draw
- 95 mA from +12V rail
- -12V / +5V draw
- 0 mA
- Power connector
- Standard 10-pin Eurorack header, negative pins marked
Physical
- Width
- 16HP
- Max depth
- 31.75 mm (less than 1.25 inches, skiff friendly)
- Artwork
- Matt Horak
Support
- Warranty
- Limited lifetime warranty
- Documentation
- Operation manual available for download