MCX8000
A 4-channel standalone DJ media player and controller that runs without a computer using Engine software from USB drives, and also works as a Serato DJ Pro controller. It suits DJs who want to play from USB sticks or a laptop.
- 4-channel standalone player and Serato DJ Pro controller
- Two displays show Engine and Serato operation
- 2 USB inputs for standalone Engine playback
- 2 mic inputs and 3 built-in effects: echo, phaser, noise
- XLR outputs for booth and PA, 24-bit sound
- StagelinQ link for lighting and video control
Foto’s
6Advertenties
Nog geen advertenties van dit model
Als iemand een MCX8000 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The MCX8000 combines a 4-channel digital mixer, two displays and velocity-sensitive performance pads in a metal chassis. In standalone mode it plays prepared libraries from USB flash drives using Engine software, so no laptop is needed. It also works as a controller for Serato DJ Pro, with all four channels usable at once, and is ready for a DVS upgrade for vinyl control.
The mixer has two microphone channels, three built-in effects (echo, phaser, noise) for Engine USB and line inputs, and 24-bit audio. Pads cover hot cues, rolls, slicer and samples. Firmware 2.1 for Engine adds waveform beatgrid display and editing, mic and USB talkover attenuation, and quantized beat sync.
Two USB ports take flash drives for Engine playback, and a powered rear USB port is for an external hard drive used with Serato DJ Pro. Balanced XLR outputs feed the booth and PA. StagelinQ networking allows control of lighting and video. Libraries are prepared on a PC or Mac in Engine Prime.
Video
Specificaties
- Merk
- Denon DJ
- Model
- MCX8000
- Categorie
- DJ-apparatuur › All-in-one-systemen
Inputs
- Microphone inputs
- 2
- USB inputs for Engine playback
- 2
- Powered rear USB port
- 1 (for external hard drive with Serato DJ Pro)
- Line input unity level
- 0 dBV
- Line input maximum level
- +18 dBV
- Mic input unity level
- -40 dBu
- Mic input minimum level
- -60 dBu
Outputs
- Master balanced maximum
- +24 dBu
- Master balanced unity
- +4 dBu
- Master unbalanced maximum
- +20 dBu
- Master unbalanced unity
- 0 dBu
- Booth maximum
- +24 dBu
- Booth unity
- +4 dBu
- Headphone output
- >150 mW @ 40 ohm
Audio
- Frequency response
- 20 Hz to 20 kHz: +/-1 dB
- Dynamic range (A-weighted)
- > 108 dB
- Signal to noise ratio (A-weighted)
- > 88 dB
- Headroom, line input
- > 18 dB
- Headroom, mic input
- > 20 dB
- Headroom, outputs
- > 20 dB
- Mic input CMRR (1 kHz, unity)
- > 80 dB
- Audio resolution
- 24-bit
Software
- Included software
- Serato DJ Pro
- Standalone software
- Engine (library prepared in Engine Prime)
- Built-in effects
- Echo, phaser, noise
Physical
- Dimensions (W x D x H)
- 728.47 x 432.82 x 70.10 mm (28.68 x 17.04 x 2.76 in)
- Weight
- 8.34 kg (18.39 lbs)
- Packed dimensions (W x D x H)
- 865.63 x 536.45 x 131.06 mm (34.08 x 21.12 x 5.16 in)
- Packed weight
- 10.71 kg (23.61 lbs)
- Construction
- Metal