Da Vinci V2.1
The da Vinci V2.1 is a moving-coil phono cartridge with an aluminium body, boron cantilever and 24-carat gold coils. It suits vinyl listeners who want a lightweight, low-output cartridge with a 6.8 g total weight.
- Moving-coil cartridge, 6.8 g total weight
- Boron cantilever, clearaudio Prime Line stylus
- Output 0.5 mV at 5 cm/s, 50 Ω impedance
- Eight-magnet patented generator system
- 24-carat gold coils, point-symmetrical layout
- Aluminium body with 30-micron ceramic coating
Foto’s
8Advertenties
Nog geen advertenties van dit model
Als iemand een Da Vinci V2.1 verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The da Vinci V2.1 is a moving-coil (MC) phono cartridge built around a boron cantilever and a clearaudio Prime Line diamond stylus profile. Total system weight is 6.8 g, and the output voltage is 0.5 mV at 5 cm/s. The needle compliance is 15 µ/mN and the recommended tracking force is 2.8 g (± 0.2 g).
The body is aluminium with a 30-micron ceramic coating, intended to drain resonances efficiently. Inside, a patented construction uses eight magnets to give a high field-line density. The 24-carat gold coils are arranged in an absolutely point-symmetrical layout. The cartridge is assembled by hand and was developed in Erlangen, Germany.
The cartridge mounts on a tonearm headshell or arm tube and connects to a phono stage suited to a low-output MC cartridge with a 50 Ω system impedance. Quoted performance includes a 20 Hz – 20 kHz frequency response, 25 – 30 dB channel separation and channel balance under 0.5 dB. The maker gives a 2-year warranty when the registration card is returned within 14 days of purchase.
Video
Specificaties
- Merk
- Clearaudio
- Model
- Da Vinci V2.1
- Categorie
- DJ-apparatuur › Elementen en naalden
Audio
- Output voltage (at 5 cm/s)
- 0.5 mV
- Frequency response
- 20 Hz – 20 kHz
- Channel separation
- 25 – 30 dB
- Channel balance
- < 0.5 dB
- Tracking ability
- 80 µm
- System impedance
- 50 Ω
- Needle compliance
- 15 µ/mN
Stylus and Generator
- Cantilever / stylus profile
- Boron / clearaudio Prime Line
- Coil arrangement
- Absolutely point-symmetrical
- Coil material
- 24-carat gold
- Magnets
- 8 (patented construction)
Setup
- Recommended tracking force
- 2.8 g (± 0.2 g)
Physical
- Weight of complete system
- 6.8 g
- Body
- Aluminium with 30-micron ceramic coating
Warranty
- Manufacturer warranty
- 2 years (registration card returned within 14 days of purchase)