rHead
The rHead is a discrete Class A headphone amplifier in a cast aluminium case. It takes RCA or XLR line inputs and has 3.5 mm and 6.35 mm outputs, for listeners who want a dedicated analogue headphone stage alongside their audio system.
- Discrete linear Class A headphone amplifier
- Switchable RCA and XLR inputs
- 3.5 mm and 6.35 mm headphone sockets
- Analogue resistive ladder volume control
- 2.0 W into 16 Ω, 1.1 W into 32 Ω
- Cast aluminium case, 0.71 kg
Foto’s
5Advertenties
Nog geen advertenties van dit model
Als iemand een rHead verkoopt, zie je hier de advertenties en de verkoopgeschiedenis.
Verkoop er zelf eenBeschrijving
The rHead is a standalone headphone amplifier built around a linear Class A design, which avoids crossover distortion. The circuit uses several low-noise power supplies and a fully direct-coupled signal path. Volume is set by an analogue resistive ladder control rather than a standard potentiometer, which avoids channel tracking errors. Protection circuitry guards the unit without affecting the sound.
It is specified to drive headphones from 16 Ω to 600 Ω and delivers 2.0 W into 16 Ω, 1.1 W into 32 Ω and 0.13 W into 300 Ω. Output impedance is below 0.5 Ω. Headphones connect through either a 3.5 mm or a 6.35 mm socket.
Source equipment connects through unbalanced RCA or balanced XLR inputs, which are switchable. The unit runs from a 12 V DC supply and is housed in a compact cast aluminium case. This model is listed as discontinued.
Video
Specificaties
- Merk
- Arcam
- Model
- rHead
- Categorie
- Koptelefoons
Inputs
- Input types
- RCA and XLR (switchable)
- Input level (RCA)
- 0-4V
- Input level (XLR)
- 0-8V
Outputs
- Headphone sockets
- 3.5 mm and 6.35 mm
- Output power, 16Ω load
- 2.0W
- Output power, 32Ω load
- 1.1W
- Output power, 300Ω load
- 0.13W
- Output impedance
- <0.5Ω
- Recommended headphone impedance
- 16Ω - 600Ω, 3.5 or 6.35mm plug
Audio
- Frequency response
- 10Hz - 20kHz
- THD+N
- 0.002% at 2V output, 32Ω load
- Signal-to-noise ratio (A-weighted)
- 98dB at 2V output, 32Ω load
- Amplifier class
- Linear Class A
- Volume control
- Ultra-linear analogue resistive ladder
Power
- Power requirements
- 12V DC, 1.5A
Physical
- Dimensions (W x H x D)
- 194 x 44 x 135mm
- Weight
- 0.71kg
- Casework
- Cast aluminium
- EAN/UPC code
- 5 060133 602576